Functions


Basic system functions:

• Altitude to 40,000 ft (12,195 m) calibrated, 1ft dynamic resolution
• Airspeed ASI analog and digital, TAS digital
• Stopwatch
• Glide and climb ratio to 1/99
• Altimeter setting 28.30 - 31.30”Hg (QNH 960 to 1060 mb)
• Quick select standard altimeter 29.92”Hg (QNE 1013 mb)
• Time of day, Date for flight log entries
• Air time since take-off (or lesson time)
• Ambient temperature using external sensor
• Up to two Fuel levels using flow sender or optional level senders
• Fuel flow using optional flow sender
• Current range estimate (range at current speed and fuel burn)
• Fuel bingo estimate (time until tank empty)
• Range calculator using manually entered ground speed
• Air distance made good
• Voltage. Supply to unit. Usually 12V battery.
• VSI +/- 9 990 ft/minute (50.7 meters per second) range
• Flight log storing up to 200 entries
• Hobbs meter, presetable to current engine time
• Density altimeter
• Barometer for ambient pressure
• Aircraft registration number display
• Maintenance timer
• Warnings for engine temperature, speed high, speed low, maximum altitude, low fuel level, etc
• Alarm output to switch a warning lamp
• Audio alarm output to drive a panel speaker or low level output for alarm tone injection into a suitably equipped headset or intercom system.
• Master and slave modes for dual instrument setup
• Measuring take-off run to 50 ft (15.24 m) above ground level
• Attitude Indicator/Artificial horizon (requires SP-3h or SP-3hc sensor)
• Slip indicator (requires SP-3h or SP-3hc)
• Rate of turn indicator (requires SP-3h, SP-3hc)
• Compass (requires SP-1, SP-2 or SP-3hc)
• Air talk link for connection to
• PC’s and Laptops using optional cable
• Stratomaster ‘Black Box’ flight recorder
• Stratomaster Ultra secondary instrument
• Download keyring flight log device
• Compass and AHRS sensor packages